PERFORMER C3 PARTYLINE HIRE.

Performer is digital partyline that rigs like analogue: beltpacks daisy-chained on ordinary three-pin XLR cable, taking their power from the line. What changes is the sound. It is digital from end to end, so there is no hum and no hiss, however long the run.

A system is C3 beltpacks and a C44plus to power them. The C44plus runs a partyline on its own, or joins it to a Riedel matrix so that beltpack users and keypanel users are on the same channels.

Riedel Performer C3 two-channel digital partyline beltpacks, front and rear

Riedel

PERFORMER C3 BELTPACK

A two-channel digital beltpack with a large rotary control for each channel: turn it for listen level, press it to talk. It takes audio and power from the line and passes both on to the next beltpack.

  • Two channels, each with its own control
  • Digital audio with no hum or hiss
  • Ordinary three-pin XLR cable, daisy-chained
  • Powered from the line
Request a quotation →
Channels
2
Controls
A rotary for each channel: listen level and talk
Call
Call button and call light
Headset connector
4-pin male XLR
Line connectors
3-pin XLR in and out, loop-through
Cable
Standard 3-pin XLR
Power
From the line
Riedel Performer C44plus system interface, 1U front panel

Riedel

PERFORMER C44PLUS SYSTEM INTERFACE

The unit that powers the beltpacks and joins them to everything else. Four partyline outputs feed the beltpack lines; on its own it runs a complete partyline, and connected to a Riedel matrix it puts the beltpacks on the matrix.

  • Four beltpack lines from one rack unit
  • Up to 38 beltpacks, 16 on a line
  • Runs stand-alone, or tied into an Artist matrix
  • Each line protected against short circuits
Request a quotation →
Beltpack lines
4, on 3-pin XLR
Beltpacks per line
Up to 16, daisy-chained
Beltpacks in total
Up to 38
Power to beltpacks
On every line, individually protected
Cable
60 Ω and 110 Ω detected automatically

WORKS WITH

The equipment this is usually hired with.

Riedel MAX double-ear intercom headset with boom microphone

Riedel

HEADSETS

MAX for loud stages, AIR for long days, PRO for broadcast: single or double ear.

Specifications →
Riedel Artist-1024 intercom matrix frame, front view with interface cards fitted

Riedel

ARTIST-1024 FRAME

A 2U matrix frame with up to 1,024 ports on SMPTE 2110-30, AES67, MADI and Dante.

Specifications →
Riedel DSP-1216HL desktop SmartPanel with 16 lever keys and touchscreens

Riedel

SMARTPANELS

1200 Series keypanels for the rack and the desk, with 16 or 32 lever keys and touchscreens.

Specifications →
Riedel RiFace G2 radio interface, 2U front panel with two radios fitted

Riedel

RIFACE G2 RADIO INTERFACE

The link between a two-way radio fleet and the intercom.

Specifications →

MORE IN WIRED INTERCOM

Clear-Com HelixNet HXII-BP-4K four-channel digital partyline beltpack

Clear-Com

HELIXNET

Digital partyline on the cable a venue already has: beltpacks, a rack station and the Arcadia that hosts them.

Specifications →
Clear-Com Encore RS-701 single-channel analogue partyline beltpack

Clear-Com

ENCORE

Analogue partyline on microphone cable: one and two-channel beltpacks and the main station that powers them.

Specifications →
Green-GO Beltpack X wired intercom beltpack

Green-GO

BELTPACK X

Digital partyline on a network cable: the beltpack, the rack interface and the signal light.

Specifications →

All wired intercom →Everything from Riedel →

  • Specifications are the manufacturers’ published figures and can change with hardware and firmware revisions. Product names and trade marks belong to their owners.

NEED IT ON A SHOW?

Tell us the dates, the venue and roughly how many people need to talk. You will get a written quotation covering equipment, engineering time and delivery.

Request a Quotation →Get in Touch →