NA2-IO-DPRO DANTE INTERFACE
Two inputs and two outputs on Dante, in a box small enough to sit on a stage or hang on a truss. The inputs take microphone, line or AES/EBU, and it runs from the network cable alone.
- Microphone, line or AES/EBU on the same connectors
- Powered over the network cable
- Primary and secondary Dante ports
- Locking connectors and a rubber protector
- Inputs
- 2 × XLR female, microphone or line
- Outputs
- 2 × XLR male, line level
- AES/EBU
- In and out on channel 2, in place of analogue
- Preamp gain
- 0 to 67 dB in 3 dB steps
- Pad
- 16 dB
- Phantom power
- 48 V, switchable
- High-pass filter
- 80 Hz
- Maximum input
- +24 dBu with pad
- Maximum output
- +24 dBu
- Sample rates
- 44.1, 48, 88.2 and 96 kHz
- Bit depth
- 16, 24 and 32 bit
- Dynamic range
- Over 112 dB, A-weighted
- Distortion
- Under 0.005% THD+N
- Frequency response
- 20 Hz to 20 kHz, ±0.5 dB
- Equivalent input noise
- −128 dBu at 67 dB gain
- Latency
- From 0.25 ms
- Dante
- 2 in, 2 out
- Ports
- 2 × etherCON, primary and secondary
- Modes
- Redundant, or switched for daisy-chaining
- Power
- PoE only, under 6 W
- Control
- Neutrik DPRO Controller; Yamaha CL and QL consoles
- Dimensions
- 164 × 82 × 51 mm with rubber protector
- Weight
- 0.53 kg
- Mounting
- Free-standing; rack panel and truss kits available
- Operating temperature
- 0 to 50 °C
