DIO0808MA-XLR DANTE INTERFACE
Eight microphone or line inputs and eight line outputs on XLR, straight onto Dante, in one rack unit. Made in the UK, and it runs from PoE, mains or 12 V, so it works wherever there is a network cable.
- 8 in and 8 out on XLR, no breakout cables
- Microphone preamps with phantom power on every input
- PoE, mains or 12 V DC, and any two for redundancy
- Set up from a web browser
- Inputs
- 8 × XLR female, microphone or line
- Outputs
- 8 × XLR male, line level, balanced
- Input gain
- −12 to +65 dB in 1 dB steps
- Output gain
- −12 to +12 dB in 1 dB steps
- Phantom power
- 48 V, switchable on each input
- Dante
- 8 in, 8 out
- AES67
- Supported
- Ports
- 2 × RJ45, primary and secondary, gigabit
- Modes
- Redundant, or switched for daisy-chaining
- Sample rates
- 44.1, 48 and 96 kHz
- Bit depth
- 24 bit
- Control
- Built-in web page; routing in Dante Controller
- Rack height
- 1U, 19-inch
- Depth
- 150 mm
- Power
- PoE, 12 V DC, or mains 110 to 240 V AC
- Redundant power
- Yes, from two of the three
